NX8 COMPETITION TURRET 

The CST Competition Turret allows the shooter to write and mark targets directly on to the turret. Marking the targets directly to the turret will reduce the time required for dialing your scope between targets.

Using a POSCA paint marker you can mark each target for any given stage of the competition. Between stages, the information can be easily erased using alcohol based wipes and marked up for the following stage. Rinse and repeat. 

POSCA paint markers and Alcohol wipes are available to buy separately or as packages on the site.

-same overall turret height as the factory turret with 1/3 more face height for data

-14.90mm/.59" writable face height

-waterproof and rub proof when used with POSCA paint markers

-easily cleaned with alcohol wipes

-more aggressive knurl for grip in wet/cold weather

-anodised 6061 aluminium

-available in MOA or MRAD

-laser engraved markings

PLEASE Specify your preferred turret layout in the COMMENTS field at the CHECKOUT.  - Chose MRAD or MOA

PLEASE contact us if you have vision impairment and require the markers on the bottom of the turret engraved at a larger size.

TO ACHIEVE FULL WATER TIGHTNESS OF THE TURRET, THE NIGHTFORCE FACTORY INSTALLED TURRET SET SCREWS MUST BE USED IN THIS TURRET.